Posicode Message Length; Trioptic Code - Honeywell 3800g User Manual

PosiCode A and B
* On
Off
You have to have PosiCode A and B on to read any of the PosiCode symbolo-
gies.
A and B On
(No Limited)
A and B and Limited A On
(Limited B Off)
* A and B and Limited B On
(Limited A Off)

PosiCode Message Length

Scan the bar codes below to change the message length. Refer to Message
Length on page 7-2 for additional information. Minimum and Maximum
lengths = 2-80. Minimum Default = 4, Maximum Default = 48.
Minimum Message Length
Maximum Message Length

Trioptic Code

Trioptic Code is used for labeling magnetic storage media.
Note: If you are going to scan Code 32 Pharmaceutical codes, Trioptic Code
must be off.
On
* Off
7 - 30 3800g/3800gHD/3800gPDF User's Guide