Reread Delay; User-Specified Reread Delay; Centering Window - Honeywell 3800g User Manual

Scan the Hands Free Time-Out bar code, then scan the time-out duration
(from 0-300,000 milliseconds) from the inside back cover, and Save . Default =
5,000 ms.

Reread Delay

This sets the time period before the imager can read the same bar code a sec-
ond time. Setting a reread delay protects against accidental rereads of the
same bar code. Longer delays are effective in minimizing accidental rereads at
POS (point of sale). Use shorter delays in applications where repetitive bar
code scanning is required. Default = Medium.
Reread Delay only works when in automatic trigger mode or presentation mode
(see page 3-4).
Short (500 ms)
Long (1000 ms)

User-Specified Reread Delay

If you want to set your own length for the reread delay, scan the bar code below,
then set the delay (from 0-30,000 milliseconds) by scanning digits from the
inside back cover, then scanning Save .

Centering Window

Use the centering feature to narrow the imager's field of view so the imager
reads only the bar code you want. When centering is turned on, the imager only
reads codes that intersect or are contained within the centering window you set
up. At least part of a bar code must be within the window to be decoded or out-
put by the imager.
3800g/3800gHD/3800gPDF User's Guide
Hands Free Time-Out
User-Specified Reread Delay
* Medium (750 ms)
Extra Long (2000 ms)
3 - 5