Codabar Concatenation - Honeywell 3800g User Manual

When Check Character is set to Validate, but Don't Transmit , the unit will only
read Codabar bar codes printed with a check character, but will not transmit the
check character with the scanned data.
* No Check Character
Validate Modulo 16, but
Don't Transmit
Validate Modulo 16 and Transmit

Codabar Concatenation

Codabar supports symbol concatenation. When you enable concatenation, the
imager looks for a Codabar symbol having a "D" start character, adjacent to a
symbol having a "D" stop character. In this case the two messages are concat-
enated into one with the "D" characters omitted. Default = Off.
Character
Start Stop Start Stop
Codabar
A12D D34A
Select Require to prevent the imager from decoding a single "D" Codabar sym-
bol without its companion. This selection has no effect on Codabar symbols
without Stop/Start D characters.
On
* Off
Require
7 - 4 3800g/3800gHD/3800gPDF User's Guide