Upc/Ean Version; Gs1 Composite Code Message Length; Gs1 Emulation - Honeywell 3800g User Manual

UPC/EAN Version

Scan the UPC/EAN Version On barcode to decode GS1 Composite symbols
that have a UPC or EAN linear component. (This does not affect GS1 Compos-
ite symbols with a GS1-128 or GS1linear component. If either of these codes
are the linear component, either Code 128 or the correct GS1 code must be
enabled.)
UPC/EAN Version On
* UPC/EAN Version Off

GS1 Composite Code Message Length

Scan the barcodes below to change the message length. Refer to Message
Length (page 7-2) for additional information. Minimum and Maximum lengths =
1-2435. Minimum Default = 1, Maximum Default = 2435.
Minimum Message Length
Maximum Message Length

GS1 Emulation

The imager can automatically format the output from any GS1 data carrier to
emulate what would be encoded in an equivalent GS1-128 or GS1 DataBar
symbol. GS1 data carriers include UPC-A and UPC-E, EAN-13 and EAN-8,
ITF-14, GS1-128, and GS1-128 DataBar and GS1Composites. If GS1-128
Emulation is selected, the AIM Symbology Identifier will be reported as "]C1". If
GS1 DataBar Emulation is selected, the AIM Symbology Identifier will be
reported as "]e0." Any application that accepts GS1 data can be simplified
since it only needs to recognize one data carrier type. Default = GS1 Emulation
Off .
GS1 Data Bar Emulation
GS1-128 Emulation
* GS1 Emulation Off
3800g/3800gHD/3800gPDF User's Guide 7 - 35