Code 93; Code 93 Message Length; Code 93 Code Page - Honeywell 3800g User Manual

Code 93

< Default All Code 93 Settings >
Code 93
* On
Off

Code 93 Message Length

Scan the bar codes below to change the message length. Refer to Message
Length on page 7-2 for additional information. Minimum and Maximum
lengths = 0-80. Minimum Default = 0, Maximum Default = 80.
Minimum Message Length
Maximum Message Length

Code 93 Code Page

Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the bar code below,
select the code page with which the bar codes were created from the chart,
Code Page Mapping of Printed Bar Codes on page A-4, and scan the value and
the SAVE bar code from the Programming Chart inside the back cover of this
manual. The data characters should then appear properly.
Code 93 Code Page
7 - 10 3800g/3800gHD/3800gPDF User's Guide