Connecting To The Mains Water Supply - Baumatic BDI652 Instruction Manual

Connecting to the mains water supply

IMPORTANT: Do not con
water supply using an old or an
The inlet hose supplied with the dishwasher is the ONLY one
that should be used.
DO NOT CONNECT THE WATER INLET HOSE TO A HOT
W A TER TAP.
The inlet hose will be located inside the cabinet of the dishwasher.
o
Connect the water inlet hose to a threaded water tap that has a
o
3/4" thread and to the inlet hose connector on the appliance.
o Fully tighten the inlet hose to the water tap and the dishwasher.
IMPORTANT: The inlet hose is fitted with an aq
s top. This MUST be fitted in the upright position, as
s hown in the above diagram.
I MPORTANT: If you ever have to disconnect the hose
f rom your water tap, you must depress the pressure
r elease button first. Otherwise you might get water
leaking from the hose.
nect the appliance to your mains
existing water inlet hose.
ua
35