Adjusting The Position Of The Plinth - Baumatic BDI652 Instruction Manual

A djusting the position of the plinth
Y ou can make an adjustment to the position and height of the plinth if
r equired, by following the process below:-
Unscrew the two screws and remove the plinth from the
o
dishwasher.
Use the two screws to adjust the distance between the
o
right hand plinth tabs. The gap can be adjusted between 39 mm
and 134 mm.
Fix the plinth on the plinth tab and then adjust the plinth
o
according to your needs. You can adjust the height of the plinth
between 56 mm to 122 mm.
left and
height
34