Cleaning The Filters - Baumatic BDI652 Instruction Manual

Cleaning the filters

For best performance and results, the entire filter assembly should be
thoroughly cleaned regularly (ideally after each wash cycle).
4. Place the fine filter back in its original position.
5. Place the main and coarse filter back into their original positions
in the base of the dishwasher. You must turn the coarse filter
clockwise to lock it back into position.
IMPORTANT: If a glass gets smashed inside of the appliance,
you must check there is no glass in the filter before the
machine is used again as this can cause a drainage failure.
IMPORTANT: THE DISHWASHER SHOULD NEVER BE
SET ON A WASH CYCLE WITHOUT THE FILTERS BEING
INSIDE OF THE APPLIANCE.
1. Turn the coarse
anti-clockwise and then
lift it upwards. Rinse out
this section under a tap
to remove
debris that remains in it.
2. Pull out the main filter
and rinse this under the
tap to remove any food
debris that is trapped in
it.
3. Pull out the fine filter and
rinse this under the tap
to remove
debris that is trapped in
it.
filter
any food
any food
24