Performing A "Hookflash" During A Call; Programming Your Feature Buttons - Inter-Tel Analog Endpoint User Manual

P
ERFORMING A
Certain telephone service companies may require a timed hookflash (a quick hang up
and release).
To generate a hookflash while using a line:
Press
SPCL
NOTE:
This features is known as a "Recall" in European systems.
P
ROGRAMMING
Depending on how your system is programmed, some of your feature buttons may be
"user-programmable." If so, you can program them with any of the feature codes
listed in the back of this user guide. In addition, you can combine the feature button
and Station Speed-Dial functions to program a feature button to dial an outside num-
ber.
NOTE:
You cannot program secondary extension buttons as feature buttons (see
page 59).
To program a user-programmable feature button:
With the handset in the cradle, dial
1.
Press the feature button you want to program.
2.
Dial the feature code or extension number you want to store under that button.
3.
(Refer to
To return all feature buttons to their original default values:
With the handset in the cradle, dial
To display the current feature button values:
With the handset in the cradle, dial
1.
Press the feature button(s) you want displayed.
2.
Press
3.
®
Inter-Tel Analog Endpoint User Guide
"H
OOKFLASH
and dial .
3 3 0
Y F
OUR EATURE
page 92 for default feature codes.)
to hang up.
SPKR
" D C
URING A
B
UTTONS
.
3 9 7
.
3 9 5
.
3 9 6
ALL
57