Performing A "Hookflash" During A Call; Programming Your Feature Buttons - Inter-Tel 8662 User Manual

P
ERFORMING A
Certain telephone service companies may require a timed hookflash (a quick hang up
and release).
To generate a hookflash while using a line:
Press and dial
NOTE:
This features is known as a "Recall" in European systems.
P
ROGRAMMING
Depending on how your system is programmed, some of your feature buttons may be
"user-programmable." If so, you can program them with any of the feature codes
listed in the back of this user guide or with extension numbers. In addition, you can
combine the feature button and Station Speed-Dial functions to program a feature but-
ton to dial an outside number.
NOTE:
You cannot program secondary extension buttons as feature buttons (see Pro-
gramming Secondary Extension Buttons on
To program a user-programmable feature button:
With the handset in the cradle, dial
1.
Press the feature button you want to program.
2.
Dial the feature code or extension number you want to store under that button.
3.
(Refer to
To return all feature buttons to their original default values:
With the handset in the cradle, dial
To display the current feature button values:
With the handset in the cradle, dial
1.
Press the feature button(s) you want displayed.
2.
Press
3.
58
"H " D
OOKFLASH
.
3 3 0
Y F
OUR EATURE
page 94 for default feature codes.)
3
to hang up.
C
URING A ALL
B
UTTONS
page 60).
.
3 9 7
.
9 5
.
3 9 6
®
Inter-Tel Model 8662 User Guide (ITP Mode)