Using The Bluetooth Devices; Registering A Bluetooth Device; Registration (Pairing) Methods; Registering Using "0Pen" - JVC KD-HDR20 Instructions Manual

Cd receiver
Hide thumbs Also See for KD-HDR20:
Table of Contents

Advertisement

[Turn]
lit
4
Enter aPIN (Personal Identification Number)
(ode to the unit.
• You can enter any number you like (l-digit to
16-digit number). [Initial: 0000]
- Some devices have their own PIN code. Enter
the specified PIN code to the unit.
[I]
Move to the next (or previous) number
position.
[I]
Repeat steps
[I]
and
[1]
until you finish
entering aPIN code.
m
Confirm the entry.
3
Select "OPEN."
Registering using 1I0PEN
II
Preparation: Operate the device to turn on its
Bluetooth function.
1
Select "BT PHONE" or "BT AUDIO./I
S R C "
2
Select "NEW DEVICE./I
,0.
I
~.~(
See page 28 about warning messages for Bluetooth
operations.
Registering a Bluetooth device
Registration (Pairing) methods
Use either of the following items in the Bluetooth menu
to register and establish the connection with adevice.
• Select "BT PHONE" or "BT AUDIO" as the source to
operate the Bluetooth menu.
OPEN
Make the unit ready to establish anew
Bluetooth connection.
Connection is established by operating the
Bluetooth device.
Using the Bluetooth® devices
To use aBluetooth device through the unit ("BT PHONE"
and "BT AUDIO") for the first time, you need to establish
Bluetooth wireless connection between the unit and
the device.
• Once the connection is established, it is registered in
the unit even ifyou reset your unit. Up to five devices
can be registered in total.
• Only one device can be connected at atime for each
source ("BT PHONE" and "BT AUDIO").
For Bluetooth operations, it is required to connect the
Bluetooth adapter (KS-BTA200) (not supplied) to the
CD changer jack on the rear of this unit.
• Refer also to the instructions supplied with the
Bluetooth adapter and the Bluetooth device.
• Refer to the list (included in the box) to check
the countries where you may use the Bluetooth@
function.
SEARCH
Make the unit ready to establish anew
Bluetooth connection.
Connection is established by operating
the unit.
...
v
"OPEN.." flashes on the display.
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents