JVC KD-HDR20 Instructions Manual page 32

Symptoms.
• The~ unit does. not detectthe Bluj!tooth
device.
"l
Remedies/Causes
.~
• Check the Bluetooth setting of the device.
, • Search from the Bluetooth device. Afterthe device
detects the unit, select "OPEN" on the unit to connect
the device. (See page 12.)
• Enter the same PIN code both for the unit and target
device.
• Select the device name from "SPECIAl," then try to
connect again. (See page 13.)
• Try to pair/connect from the Bluetooth device.
Adjust the microphone unit position.
• Reduce the distance between the unit and the
Bluetooth cellular phone.
• Move the car to aplace where you can get abetter
signal reception.
• Reduce the distance between the unit and the
Bluetooth audio player.
• Disconnect the device connected for "BT PHONE."
• Turn off, then turn on the unit.
• (When the sound is not yet restored,) connect the
device again.
Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
Insert adisc into the magazine.
Insert the magazine.
Connect this unit and the CD changer correctly and press
the reset button ofthe CD changer.
Press the reset button of the CD changer.
Reset the unit (see page 3).
*2
For Bluetooth operations, refer also to the instructions supplied with the Bluetooth Adapter.
32