Searching For Hd Radio Stations Only; Improving The Fm Reception; Changing Hd Radio Reception Mode; While Listening To An Hd Radio Station - JVC KD-HDR20 Instructions Manual

[Turn]
-+
[Press]
• Repeat this procedure.
[Hold]
The menu is called up.
Lights up when holding the digital reception.
Flashes when holding the analog reception.
Select''TUNER'' .... ''BLEND HOLD"
.... "AUTO/DIGITALIANALOG"
While listening to an HD Radio station...
• See also page 24.
Changing HD Radio reception
mode
While receiving an
HD
Radio broadcast, the unit
receives digital or analog audio automatically due to
the receiving condition.
[Hold]
[Hold]
2
Select
"TUNER."
When astation is tuned in, searching stops.
• Improving the FM reception
When an FM stereo broadcast is hard to receive,
activate monaural mode for better reception.
• See also page 24.
1
Call up the menu.
• Searching for HD Radio stations
only
[Turn]
-+
[Press]
3
Select "MONO/'
4
Select "MONO ON."
Reception improves, but stereo effect will be lost.
• The MO indicator lights up on the display.
• If no sound can be heard with "AUTO," change the
setting to "ANALOG" or "DIGITAL."
• The setting automatically returns to "AUTO" in the
following cases:
- When you tune in to another broadcast.
- When you change to another source.
- When you turn off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the
HOLD
indicator flashes.
[Turn]
-+
[Press]
[Turn]
-+
[Press]
To restore the stereo effect, repeat the same
procedure to select "MONO OFF." The MO indicator
goes off.
OPERATIONS
9