Notes - Siemens SATURN IIE EPABX Installation Test Procedures

SATURN IIE EPABX
Installation Test Procedures
System E&M Connecting Block

Notes:

Dashed lines
connections. Broadcast type connection from music source
s h o w n . Two k i n d s o f m u s i c s o u r c e c a n b e c r o s s - c o n n e c t e d , c o n -
tinuous type and demand type. For continuous mustc,
leads are not used; and for demand music, the E&M leads are
Figure 6.14
Music Source
Notes: Dashed lines represent installation-dependent cross-
c o n n e c t t o n s .
System MDF Cable connections are shown for an
SLMA PCB. For SLA16 connections, refer to Ftgure
6.03.
Only continuous type music sources may be cross-
connected.
Figure 6.15 Music-on-Hold Cross-Connections Using SLMAiSLAl6
I n t e r f a c i n g
System T&R Connecttng 61ocl(
represent installation-dependent
the E&M
Cross-Connections Using TMBA4 PC0
EQUIPMENT
Interfacing Connecting Sloc!c
System T&R Connecting Block
System MDF Cable J32. J34. J36.
or J40 from the LTU shelf
System MDF Cable
from the @asic shelf; or J27, J29, J31, J33, J35, J37, J39
or J41 from the LTU shelf
cross-
ROOM
System MDF Cable J32, J34. J36, J36, JSO, J42
or J44 from the Basic shelf or J26, J26, J30, J32,
T
Station
Circuit
Within an
Issue 1, May 1988
J44
Line
PCB
PCB
6-9