Enable Network Address Translation - NETGEAR N450 User Manual

A login screen displays.
2. Enter the modem router user name and password.
The default user name is admin. The default password is password. The user name and
password are case-sensitive.
The modem router main menu displays.
3. In the main menu, under Advanced, select NTP.
The following screen displays:
4. Select the NTP enable check box.
5. Enter the IP server addresses:
a. Enter the first server IP address in the Server IP Address 1 field.
b. Enter the second server IP address in the Server IP Address 2 field.
c. Enter the third server IP address in the Server IP Address 3 field.
6. Click the Apply button.
Your changes are saved.

Enable Network Address Translation

Network Address Translation (NAT) provides one-to-many translation of IP addresses
between devices. This means that your network presents only one IP address to the Internet,
and outside users cannot directly address any of your local computers. Enable NAT to allow
multiple computers on your network to access the Internet using a single public IP address.
NAT is enabled by default.
N450 WiFi Cable Modem Router Model N450/CG3000Dv2
Advanced Settings
74