Factory Default Settings - NETGEAR N450 User Manual

Factory Default Settings

You can return the modem router to its factory settings. On the rear panel of the modem
router, press and hold the Reset button
resets and returns to the factory configuration settings shown in the following table.
Table 3. Factory default settings
Feature Parameter
Modem Router User login URL
login
User name and password
(case-sensitive)
Local network LAN IP
(LAN)
Subnet mask
DHCP server
DHCP starting IP address
DHCP Ending IP address
Firewall Inbound communication from the
Internet
Outbound communication to the
Internet
Source MAC filtering
Internet WAN MAC address
connection
WAN MTU size
N450 WiFi Cable Modem Router Model N450/CG3000Dv2
Supplemental Information
for over seven seconds. The modem router
Default
http://192.168.0.1
admin/password
192.168.0.1
255.255.255.0
Enabled
192.168.0.2
192.168.0.254
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Use default hardware address.
1500
86