Table of Contents
Advertisement
Orbi Pro WiFi 6 AX5400 Router Model SXR50 and Orbi Pro WiFi 6 AX5400 Satellite Model SXS50
Enable a MAC ACL for a specific network
When you enable a MAC ACL for a specific network, you must specify the default policy
for that network. The default policy determines whether devices that you add to the
MAC ACL are allowed or denied access to that specific network.
You can set up an independent MAC ACL for each of the WiFi networks and for the
wired network. That is, the router supports multiple MAC ACLs.
To enable a MAC ACL for a specific network:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see What to do if you get a browser security warning on
page 29.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you set the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > MAC ACL.
The MAC ACL page displays.
5. Go to the section for the network for which you want to set up a MAC ACL.
Note: Each section name corresponds to the SSID (WiFi network name) of a WiFi
network, but the section for the Ethernet network is called Wired. If you did not
change the SSIDs (see Manage the WiFi Networks on page 85), the unique preset
SSIDs for your product are displayed.
6. For the specific network, click the Enable MAC Access Control Disabled button.
The button changes to the green Enabled button.
Note: If you enabled the network access control list (see Enable the network access
control list and specify the access rule on page 59), you cannot enable any MAC
ACLs. The network access control list and MAC ACLs are mutually exclusive. Use
either the network access control list or MAC ACLs.
Control Access to the Internet
54
User Manual
Advertisement
Table of Contents
