NETGEAR N450 User Manual page 22

N450 WiFi Cable Modem Router Model N450/CG3000Dv2
The following screen displays:
5. Click the Next button.
The following screen displays:
6. Either click the WPS button
the modem router.
The following occurs:
• The WPS LED on the front of the modem router begins to blink.
• The modem router tries to communicate with the wireless computer or device for two
minutes.
• If the security option in the Wireless Settings screen was set to Disable, it is
automatically changed to WPA-PSK [TKIP] + WPA2-PSK [AES], including a random
wireless security password.
7. Go to the computer or mobile device, and run its WPS configuration utility.
8. To click the WPS button, follow the utility's instructions.
When the computer or mobile device connects to the wireless network, the modem router
sends its SSID and WPA-PSK or WPA2-PSK configuration to that computer.
9. On the computer that just joined the wireless network, make sure that you can connect to
the Internet.
on the screen, or press the WPS button
Configuring Your Wireless Network
22
on the front of