Table of Contents
Advertisement
Orbi Pro WiFi 6 Mini Router SXR30 and Orbi Pro WiFi 6 Mini Satellite SXS30
Enable a MAC ACL for a specific network
When you enable a MAC ACL for a specific network, you must specify the default policy
for that network. The default policy determines whether devices that you add to the
MAC ACL are allowed or denied access to that specific network.
You can set up an independent MAC ACL for each of the WiFi networks and for the
wired network. That is, the router supports multiple MAC ACLs.
To enable a MAC ACL for a specific network:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window displays.
If your browser does not display a login window but displays a security warning and
does not let you proceed, see Resolve a browser security warning on page 27.
3. Enter the admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Security > MAC ACL.
The MAC ACL page displays.
5. Go to the section for the network for which you want to set up a MAC ACL.
6. For the specific network, click the Enable MAC Access Control Disabled button.
The button changes to the green Enabled button.
Note: If you enabled the network access control list (see Enable the network access
control list and specify the access rule on page 57), you cannot enable any MAC
ACLs. The network access control list and MAC ACLs are mutually exclusive. Use
either the network access control list or MAC ACLs.
7. From the Default Policy menu, select one of the following options:
• Allow: The policy is to allow all devices access except for the devices that you
add to the MAC ACL. Devices on the MAC ACL are denied access to the specific
network.
• Deny: The policy is to deny all devices access except for the devices that you
add to the MAC ACL. Devices on the MAC ACL are allowed access to the specific
network.
Control Access to the Internet
52
User Manual
Advertisement
Table of Contents
