The Port Vid Screen; Figure 36 Port Vid Settings - ZyXEL Communications ES-305 User Manual

Table 7 VLAN Group Settings
LABEL
Management VID
Multicast VLAN
registration
VLAN ID
Priority
OK
Cancel

5.3 The Port VID Screen

Use this screen to configure the VLAN ID (VID) of each port on the ES-305. The ES-305
assigns a PVID (Port VLAN ID) and IEEE 802.1p priority level to outgoing untagged traffic
from each port. If the traffic already possesses an IEEE 802.1Q VLAN tag, it is not changed.
Click VLAN > Port VID Settings. The following screen displays.

Figure 36 Port VID Settings

ES-305 User's Guide
DESCRIPTION
The management VLAN is used for accessing the ES-305. Only devices
connected to ports that are members of the management VLAN can access
the ES-305.
Enter the VLAN identification number associated with the ES-305. The
default is 1. All ports are members of the management VLAN by default.
Note: If no port is a member of this VLAN, you cannot access
the ES-305.
Multicast VLAN Registration (MVR) allows multiple users to subscribe to a
multicast VLAN stream (television service, for example) while remaining in
separate VLANs. Select Enable to subscribe to the multicast VLAN stream
you configure in the VLAN ID field.
Enter the multicast VLAN ID (1 ~ 4094).
Enter the 802.1p priority level for multicast VLAN traffic.
Click this to save your changes.
Click this to return this screen to its last-saved settings.
Chapter 5 VLAN Screens
57