Night Owl Tiger-4500 Instruction Manual page 22

2. Write down the: IP Address provided by your ISP (if your ISP is using Static IP), Subnet
Mask, Gateway Address, DNS Address(es) provided by your ISP of your DVR for future
reference when configuring the DVR.
NETWORK SETUP
<00:11:22:33:44:55>
MAC ADDRESS
[STATIC]
IP ALLOCATION
[192.168.1.100]
IP ADDRESS
[255.255.255.0]
SUBNET MASK
[192.168.1.1]
GATEWAY
[0.0.0.0]
DNS1 ADDRESS
[0.0.0.0]
DNS2 ADDRESS
[
HTTP PORT
USER SETUP
DDNS SETUP
(HTTP PORT) 80， 1024-49151
( ) MOVE (SEL) SELECT (MENU) EXIT
NETWORK SETUP
<00:11:22:33:44:55>
MAC ADDRESS
[STATIC]
IP ALLOCATION
[192.168.1.100]
IP ADDRESS
[255.255.255.0]
SUBNET MASK
[192.168.1.1]
GATEWAY
[0.0.0.0]
DNS1 ADDRESS
[0.0.0.0]
DNS2 ADDRESS
[
HTTP PORT
USER SETUP
DDNS SETUP
(HTTP PORT) 80， 1024-49151
( ) MOVE (SEL) SELECT (MENU) EXIT
NETWORK SETUP
<00:11:22:33:44:55>
MAC ADDRESS
[STATIC]
IP ALLOCATION
[192.168.1.100]
IP ADDRESS
[255.255.255.0]
SUBNET MASK
[192.168.1.1]
GATEWAY
[0.0.0.0]
DNS1 ADDRESS
[0.0.0.0]
DNS2 ADDRESS
[
HTTP PORT
USER SETUP
DDNS SETUP
(HTTP PORT) 80， 1024-49151
( ) MOVE (SEL) SELECT (MENU) EXIT
NETWORK SETUP
<00:11:22:33:44:55>
MAC ADDRESS
[STATIC]
IP ALLOCATION
[192.168.1.100]
IP ADDRESS
[255.255.255.0]
SUBNET MASK
[192.168.1.1]
GATEWAY
[0.0.0.0]
DNS1 ADDRESS
[0.0.0.0]
DNS2 ADDRESS
[
HTTP PORT
USER SETUP
DDNS SETUP
(HTTP PORT) 80， 1024-49151
( ) MOVE (SEL) SELECT (MENU) EXIT
80]
80]
80]
80]
MAC Address: is the unique ID of your DVR. Your
router or other computer in your network can use the
MAC Address to identify your DVR.
Important: MAC address should only be changed if
multiple DVRs are being setup on the same network
with same MAC Address.
IP Allocation: The DVR supports DHCP and Static IP
modes. Select Static IP if your ISP provides you a Static
IP address. Select DHCP if your ISP uses DHCP or
Dynamic IP Address.
IP Address: If your ISP provides you a Static IP
Address, enter the IP Address in this field. You do not
need to configure this field if your ISP uses DHCP.
Subnet Mask：Subnet Mask is used to determine what
subnet an IP address belongs to. A number that is used
to identify a sub network so that IP address can be
recognized on a local area network. Consult your
modem/router for your LAN's subnet mask. It is
recommended to leave the Subnet mask as the default
255.255.255.0. You do not need to configure this field if
your ISP uses DHCP.
20
User's Manual