Table of Contents
Advertisement
4.10.9 Miscellaneous Setup – Video Loss Sound
MISCELLANEOUS SETUP
CHANGE PASSWORD
SET TIME
HIDDEN CHANNEL
AUDIO PORT SETUP
IMAGE PARAMETERS
PASSWORD ENABLE
KEYPAD TONES
SEQ. DWELL TIME
VIDEO LOSS SOUND
(
)MOVE (SEL)SELECT (MENU)EXIT
4.11 Network Setup
4.11.1 Network Setup – Intranet (Internal Access)
(
)MOVE (SEL)SELECT (MENU)EXIT
If your DVR is connected to a router of your local network (intranet), then you can setup the
NETWORK Setup section of the DVR to view the image your DVR is recording remotely using
computers connected within your network.
Important Note: You will not be able to access your DVR if your DVR is connected behind two
or more routers.
Note: Prior to changing the NETWORK Setup of your DVR, it is strongly recommended that you
perform the following tasks:
1. Access the configuration page of your router.
2. Reserve an IP Address in your router that is not used by other computers or devices
connected to your internal network.
3. Write down the assigned IP Address of your DVR, Subnet Mask, IP Address of your
Router (Gateway) of your DVR for future reference when configuring the DVR.
NETWORK SETUP
MAC ADDRESS
IP ALLOCATION
IP ADDRESS
SUBNET MASK
GATEWAY
DNS1 ADDRESS
DNS2 ADDRESS
HTTP PORT
USER SETUP
DDNS SETUP
(HTTP PORT) 80， 1024-49151
(
) MOVE (SEL) SELECT (MENU) EXIT
NETWORK SETUP
MAC ADDRESS
IP ALLOCATION
IP ADDRESS
SUBNET MASK
GATEWAY
DNS1 ADDRESS
DNS2 ADDRESS
HTTP PORT
USER SETUP
DDNS SETUP
(HTTP PORT) 80， 1024-49151
(
) MOVE (SEL) SELECT (MENU) EXIT
[ 4 ]
[ CH4 ]
[ OFF]
[ ON ]
[ ON ]
[ ON ]
<00:11:22:33:44:55>
[STATIC]
[192.168.1.100]
[255.255.255.0]
[192.168.1.1]
[0.0.0.0]
[0.0.0.0]
[
80]
<00:11:22:33:44:55>
[STATIC]
[192.168.1.100]
[255.255.255.0]
[192.168.1.1]
[0.0.0.0]
[0.0.0.0]
[
80]
This option allows your DVR to emit a high pitch
notification sound when the signal between the camera
and the DVR is loss. Press the [SEL] buttons to Select
"on" / "off".
MAC Address: is the unique ID of your DVR. Your
router or other computer in your network can use the
MAC Address to identify your DVR.
Important: MAC address should only be changed if
multiple DVRs are being setup on the same network
with same MAC Address.
IP Allocation: The DVR supports DHCP and Static IP
modes. But it is recommended that you use STATIC IP
because Static IP is a pre-defined address that will not
be changed. Using a static IP Address will make your
DVR much easier to locate by computers in your
network.
17
User's Manual
Hide quick links:
Advertisement
Table of Contents
