Controlling Your Ipod/Iphone - Onkyo TX-8050 Instruction Manual

iPod/iPhone Playback via Onkyo Dock
RI Dock
With the RI Dock, you can easily play the music stored
on your Apple iPod/iPhone through the receiver and
enjoy great sound. You can even use the receiver's
remote controller to operate your iPod/iPhone.
Notes:
• Connect the RI Dock to the receiver with an  cable

( page 16).
• Set the RI Dock's RI MODE switch to "HDD" or
"HDD/DOCK".
• Set the receiver's Input Display to "DOCK" (
■ System Function
System On
When you turn on the receiver, the RI Dock and your
iPod/iPhone turn on automatically. In addition, when
the RI Dock and iPod/iPhone are on, the receiver can
be turned on by pressing [ON/STANDBY].
Auto Power On
If you start iPod/iPhone playback while the receiver
is on Standby, the receiver will automatically turn on
and select your iPod/iPhone as the input source.
Direct Change
If you start iPod/iPhone playback while listening to
another input source, the receiver will automatically
switch to the input to which the RI Dock is
connected.
Other Remote Controllers
You can use the remote controller that came with the
receiver to control other iPod/iPhone functions. The
available functionality depends on the receiver.
iPod/iPhone Alarm
If you use the Alarm function on your iPod/iPhone
to start playback, the receiver will turn on at the
specified time and select your iPod/iPhone as the
input source automatically.
Notes:
• Linked operations do not work with video playback or
when the alarm is set to play a sound.
• If you use your iPod/iPhone with any other
accessories, iPod/iPhone playback detection may not
work.
—Continued
Operating Notes
• Use the receiver's volume control to adjust the
playback volume.
• While your iPod/iPhone is inserted in the RI Dock,
its volume control has no effect.
• If you do adjust the volume control on your iPod/
iPhone while it's inserted in the RI Dock, be careful
that it's not set too loud before you reconnect your
earphones.

page 18).
Note:
On the iPod with video and iPod nano (1st generation),
the click wheel is disabled during playback.

Controlling Your iPod/iPhone

See the Dock's instruction manual for more information.
■ UP-A1 Dock
You can control your iPod/iPhone when "PORT" is
selected as the input source.
■ RI Dock
• Set the RI Dock's RI MODE switch to "HDD" or
"HDD/DOCK".
• You can control your iPod/iPhone when "DOCK" is
selected as the input source.
37
En-