Using The Usb/Network Device; Connecting The Ipod/Iphone Directly To The Usb Port - Onkyo TX-8050 Instruction Manual

Using the USB/Network Device

Connecting the iPod/iPhone Directly
to the USB Port
USB can be used to play music files stored on iPod/
iPhone, which can be plugged into the receiver's USB
port.
USB
REPEAT
Playing Music Files on the iPod/iPhone
This section explains how to play music files on the
iPod/iPhone.
Compatible iPod/iPhone models
Made for:
iPod touch (1st, 2nd, 3rd and 4th generation), iPod
classic, iPod with video, iPod nano (1st, 2nd, 3rd, 4th,
5th and 6th generation), iPhone 4, iPhone 3GS, iPhone
3G, iPhone
1 Press [USB] to select the USB input.
2 Connect the USB cable that comes with the
iPod/iPhone to the USB port at the front of
the receiver.
• The USB appears in the display if the receiver is
able to read the iPod/iPhone.
• The USB flashes if the receiver cannot read the
iPod/iPhone.
28
En-
3
4
USB port
MODE
U, J, I, Q, R,
W, K
RANDOM
■ Standard Mode control
The content information is not displayed on the
receiver's display, but can be manipulated using the
&, (, ENTER
iPod/iPhone or the Remote Controller.
Note:
The audio of video content can be played back but no
video will be displayed onscreen.
■ Extended Mode control
The content information is displayed (lists are displayed)
on the receiver's display, and you can select and
manipulate the content while looking at the receiver's
display.
Top display list:
Playlists, Artists, Albums, Genres, Songs, Composers,
Shuffle Songs, Now Playing
*1 When you disconnect the iPod/iPhone, the receiver
*2 The following iPod models are not supported in
Press [MODE] to switch to Extended
*1
Mode .
A list of your iPod model's contents appears. To
open a folder, use []/[] to select it, and then
press [ENTER].
• With the default settings, the iPod/iPhone can be
manipulated as Standard Mode
• Pressing [MODE] again switches back to
Standard Mode.
Use []/[]to select a music file, and
press [ENTER] or [] to start playback.
• To return to the previous menu during playback,
press [RETURN].
• To stop or pause playback, press [] or [],
respectively.
• To select the next song, press []. To select the
beginning of the current song, press [].
To select the previous song, press [] twice.
• To fast forward the current song, press [].
To fast reverse the current song, press [].
• To switch the repeat mode, press [REPEAT].
To switch the random mode, press [RANDOM].
stores the mode. This means that if you disconnect
when in Extended Mode, the receiver will start in
Extended Mode when you next connect the iPod/
iPhone.
Standard Mode. These iPod models can only be
controlled in Extended Mode.
iPod (5th generation)
iPod nano (1st generation)
*2
.