Onkyo TX-8050 Instruction Manual page 15

Connecting Your Components
.
No. Jack/Port
1
USB
2
DIGITAL IN OPTICAL
COAXIAL
3
UNIVERSAL PORT
4
ETHERNET
5
MONITOR OUT
6
BD/DVD IN
VCR/DVR IN
CBL/SAT IN
GAME IN
TV/TAPE IN
CD IN
PHONO IN
Notes:
• Refer to the connected component's instruction manual for details.
• Do not connect the receiver's USB port to a USB port on your computer. Music on your computer cannot be played
through the receiver in this way.
• Connect a turntable (MM) that has a built-in phono preamp to CD IN, or connect it to PHONO IN with the phono
preamp turned off. If your turntable (MM) doesn't have a phono preamp, connect it to PHONO IN. If your turntable
has a moving coil (MC) type cartridge, you'll need a commercially available MC head amp or MC transformer to
connect to PHONO IN. See your turntable's manual for details. If your turntable has a ground wire, connect it to the
GND screw. With some turntables, connecting the ground wire may produce an audible hum. If this happens,
disconnect it.
3 6
• Connection and lets you listen to and record audio from the external components while you are in Zone 2. You
can listen to and record audio from the external components in the main room; you can listen to the audio in Zone 2
as well.
• If your Blu-ray Disc/DVD player has both main stereo and multichannel outputs, be sure to connect the main stereo
6
output using connection
■ How to record a video source
See "Recording" to make connections for video recording ( page 22).
—Continued
Connectable components
iPod/iPhone, MP3 player, USB flash drive
1 (GAME) Game console
2 (CD) TV, CD player
1 (BD/DVD) Blu-ray Disc/DVD player
2 (CBL/SAT) Satellite/cable set-top box, RI dock, etc.
Universal port option dock (UP-A1 etc.)
Router
TV, projector, etc.
Blu-ray Disc/DVD player
VCR or DVD recorder/digital video recorder, RI dock
Satellite/cable set-top box, etc.
Game console, RI dock
TV, cassette tape deck, RI dock
CD player, Turntable
Turntable
.
15
En-