Enjoying Audio Sources; Muting The Receiver (Remote Controller Only); Using Headphones - Onkyo TX-8050 Instruction Manual

Enjoying Audio Sources

SPEAKERS A, B
PHONES INPUT
1 Rotate the receiver's [INPUT] selector, or
press the remote controller's INPUT
SELECTOR buttons to select the source
you want to hear.
2 Use the [SPEAKERS A] and [SPEAKERS B]
buttons on the receiver to select the
speaker set that you want to use.
The A and B speaker indicators show whether each
speaker set is on or off.
3 Start playback on the selected component.
4 To adjust the volume, use the receiver's
[VOLUME] control, or the remote
controller's VOLUME []/[] buttons.
Turn the control clockwise to turn up the volume or
counterclockwise to turn down the volume.
VOLUME
A,B Indicators
INPUT
SELECTOR
Muting the Receiver
(remote controller only)
You can temporarily mute the output of the receiver.
Press the remote controller's [MUTING] button.
The receiver is muted.
To unmute the receiver, press the [MUTING]
button again.
Note:
The Mute function will be cancelled if the remote
controller's [VOLUME] buttons are pressed or the
receiver is set to Standby.

Using Headphones

You can connect a pair of stereo headphones (1/4-inch
phone plug) to the receiver's PHONES jack for private
listening.
Notes:
• Always turn down the volume before connecting your
headphones.
• While the headphones plug is inserted in the PHONES
jack, the speakers are turned off.
• If you connect an iPod or iPhone to the USB port on
this device, no sound will be output from the
headphones jack.
VOLUME F/H
MUTING
19
En-