Life Fitness 9500HR User Manual page 29

l
Setting the password
1. Press CLEAR–PAUSE until the message center displays "Press Start to Begin".
Press CLEAR–PAUSE again.
2. Press 9-5-0-0 on the numeric keypad and press START–ENTER.
3. "Password ___" will appear in the Message Center window. Enter a password at
this time (a valid password is any number between 1 and 999). You can press
CLEAR–PAUSE at any time while setting a password to delete your entry.
4. After setting a password, press the START–ENTER key. The new password has
now been accepted.
Once the password protection mode has been set, each time someone presses the
START–ENTER, the message center will ask the user for the password. The user must
press the numeric code and the START–ENTER key for the Life Fitness 9500HR train-
er to continue. If an incorrect password is entered, the message center will continue to
prompt the user for the correct password.
l
If you forget the password
1. Press CLEAR–PAUSE until the message center displays "Press Start to Begin."
Press CLEAR–PAUSE again.
2. Press 9-5-0-0 on the numeric keypad and press START–ENTER. Your password
will now appear in the Message Center window. Press the STOP button to exit.
l
Changing the password
1. Press CLEAR–PAUSE until the message center displays "Press Start to Begin."
Press CLEAR–PAUSE again.
2. Press 9-5-0-0 on the numeric keypad and press START–ENTER. Your password
will now appear in the Message Center window.
3. Key in a new password (1-999).
4. Press the START–ENTER key. The new password is now in effect.
l
Disabling the password
1. Press CLEAR–PAUSE until the message center displays "Press Start to Begin."
Press CLEAR–PAUSE again.
2. Press 9-5-0-0 on the numeric keypad and press START–ENTER. Your password
will now appear in the Message Center window.
3. Press CLEAR–PAUSE and the START–ENTER key. Your password is now disabled
and the Life Fitness 9500HR treadmill will operate without requiring a password.
29