Sony HCD-ZX70DVD Service Manual page 16

TRAY (SUB)
1 Rotating the pulley (LD), shift the slider (selection) in the arrow A direction.
2 Rotating the pulley (mode) in the arrow direction, adjust the tray (sub) to be removed.
3 Rotating the pulley (LD), shift the slider (selection) in the arrow B direction.
4 Rotating the pulley (mode) in the arrow direction, remove the tray (sub) to be removed.
stocker section
tray (sub)
CHASSIS (MOLD B) SECTION, STOCKER SECTION AND SLIDER (SELECTION)
4 two step
screws
16
pully (LD)
6 two screws
5 stocker
section
Pully (LD)
4 two step screws
A
B
(PTPWH M2.6)
7 slider (selection)
8 washer
9 compression
1 three screws
spring
3 gear (eject)
slider (selection)
pully (mode)
(BVTP M2.6)
2 chassis (mold B) section
Note: Rotating the pully (LD),
shift the slider (selection)
to the left.