Throltle Cable Inspection - Honda HARMONY HRB215PXA Owner's Manual

MAINTENANCE
THRO-ITLE CABLE INSPECTION
Throttle cable adjustment is necessary if the throttle lever does not
operate the choke properly.
You can inspect choke operation by observing the movement of the
choke arm, which is located on top of the carburetor.
1. Move the throttle lever to the
CHOKE position. The choke
arm should move
counterclockwise, until it
contacts the stop post on the
carburetor.
Push the choke arm with your
finger to verify that it has
moved as far as it will go.
2. Move the throttle lever to the
FAST position. The choke arm
should move clockwise, until it
contacts the stop post on the
carburetor:
Push the choke arm with your
finger to verify that it has
moved as far as it will go.
THRO-KLE LEVER
g
ii >
CHOKE ARM
3. If the choke arm does not move
all the way to its stop, in either
direction, take the mower to an
authorized Honda servicing
dealer. Throttle cable
adjustment involves related
control plate adjustments.
59