Throttle Cable Inspection - Honda HRC216PDA Owner's Manual

SERVICING YOUR LAWN MOWER

THROTTLE CABLE INSPECTION

Throttle cable adjustment is necessary if the throttle lever does not
operate the choke properly.
You can inspect choke operation by observing the movement of the
choke arm, which is located on top of the carburetor.
1. Move the throttle lever to the
CHOKE position. The choke
arm should move
counterclockwise until it
contacts the stop post on the
carburetor.
Push the choke arm with
your finger to verify that it
has moved as far as it will
go.
2. Move the throttle lever to the
FAST position. The choke
arm should move clockwise
until it contacts the stop post
on the carburetor.
Push the choke arm with
your finger to verify that it
has moved as far as it will
go.
3. If the choke arm does not
move all the way to its stop in
either direction, take the
mower to an authorized
Honda servicing dealer.
Throttle cable adjustment
involves related control plate
adjustments.
40
CHOKE
THROTTLE
LEVER
CHOKE
ARM