Table of Contents
Advertisement
SERVICING YOUR LAWN MOWER
THROTTLE CABLE INSPECTION
Throttle cable adjustment is necessary if the throttle lever does not
operate the choke properly.
You can inspect choke operation by observing the movement of the
choke arm, which is located on top of the carburetor.
1. Move the throttle lever to the
FAST position.
2. Remove the air cleaner cover
(page
36).
3. Use a feeler gauge and
CONTROL
CHOKE
ARM
measure the clearance between
the control choke arm and the
control lever. The clearance
should be 0
-
0.040 in
(0
-
1 mm).
CONTROL LEVER
4. To adjust the
clearance,
loosen
LOCK
the lock nuts with a 10 rnm
NUTS
wrench. Move the adjuster up or
down as required to obtain the
proper clearance. Tighten the
lock nuts.
\
ADJUSTER
42
Hide quick links:
Advertisement
Table of Contents
