MAINTENANCE
Drive Clutch Cable Adjustment (HXA)
1. With the engine stopped,
position the control cable bands
as shown.
2.
3.
Pull the shift lever all the way
back to the neutral position.
THROlTLE
Start the engine and move the
throttle lever to the FAST
position.
4. Engage the drive clutch lever
and confirm the following:
a. Mower does not self-propel.
b. Mower begins to self-propel
or creeps very slowly forward
when the shift lever is moved
one notch forward.
DRIVE CLUTCH LEVER
If the mower does not operate
as outlined above, go to step 5.
If the mower does operate as
outlined above, go to step 6.