Detection; Signals Detected; Audio Alerts; Visual Display - Cobra RAD350 Operating Instructions Manual

Detection

Your Detector

Signals Detected

The tables on the following pages show you the types of Signals your detector will
detect, as well as the visual alerts it provides for each of them.

Audio Alerts

A distinctly different Alert tone is used for each type of signal detected (including
separate tones for each laser signal). For X, K and Ka band radar signals, the tones
will repeat faster as you approach the signal source. The repeat rate of the tones
gives you useful information about the signal detected. (See responding to alerts
on page 14.)

Visual Display

An indication of the type of signal detected will appear in the display.
During X, K, and Ka alerts, a number will also appear, indicating the strength of
the signal detected. (1 = weakest, 5 = strongest).
Weak X Signal Detected Moderate K Signal Detected Strong Ka Signal Detected
2 3 5
X K Ka V X K Ka V X K Ka V
Laser Signal Detected
L
X K Ka V
VG-2 Alert Signal Detected
c
X K Ka V
Nothing Comes Close to a Cobra
®
11