Enable Global Roaming Mode; Make And Receive Worldwide Calls - HTC Sprint User Manual

4. Pull the tray out, and place the Nano SIM card into the tray.
5. Insert the tray back into the slot.
6. Turn on the phone.

Enable Global Roaming Mode

Your phone is designed to enter global roaming mode automatically when you activate your
Sprint Worldwide service, meaning that it should automatically connect to an appropriate
CDMA/LTE network or GSM/UMTS network when you travel. You may set global roaming
options through the settings menu. You may also need to set your network mode options
through the settings menu.
To enable your phone for international roaming:
1. With two fingers, swipe down from the status bar, and then touch
Roaming > Automatic.
2. From Mobile network settings, touch the checkbox for International Voice.
3. With International Voice selected, touch the checkbox for International Data.
To set your network mode options manually:
1. With two fingers, swipe down from the status bar, and then touch
Network mode.

To allow connections to CDMA or LTE networks only, touch CDMA Only or
LTE/CDMA.

To allow connections to GSM or UMTS networks only, touch GSM/UMTS Only.

To allow connections to available CDMA/LTE or GSM/UMTS networks, touch
Automatic. This is the recommended setting for international use.

Make and Receive Worldwide Calls

When traveling on international networks, you can place and answer calls as you would on the
Sprint Network (see Make Phone Calls
instructions may be required to place a call. Some features and services are not available in all
Sprint Worldwide Wireless Service
and Receive Phone Calls), although some additional
> MOBILE DATA >
> MOBILE DATA >
205