Power Settings; Optimize Battery Life With Power Saver Mode; Use Extreme Power Saving Mode - HTC Sprint User Manual

Sprint
Table of Contents

Advertisement

2. Touch Phone storage encryption. Or, touch Encrypt SD card content.
3. Touch NEXT.
4. Enter the lock screen PIN or password, and touch NEXT.
5. Touch ENABLE ENCRYPTION
During phone storage encryption, the phone may restart a few times. When storage encryption
is complete, enter your PIN or password.
Note: If you turn off SD card encryption to stop encrypting new files, previously encrypted files
will remain encrypted. To access these files, you must enable encryption again for your storage
card.

Power Settings

Use the Power settings to check the phone's battery, enable Power saver mode, and more.

Optimize Battery Life with Power Saver Mode

Power saver mode helps to increase battery life. It reduces the usage of phone features that
drain the battery such as the display and data connection.
1. With two fingers, swipe down from the status bar to open the Quick Settings panel.
2. Touch
below the POWER SAVER tile to choose which phone features to conserve
power for.
Note: If Data connection is selected, your phone automatically disconnects from the mobile
network after 15 minutes when the screen is off and the data connection is idle (no download
activity, streaming, or data usage). It reconnects and then disconnects periodically when the
data connection is idle to save battery power.
Note: Keep in mind though that the Sleep mode option for the data connection in Settings >
Power, when enabled, overrides power saver mode.
3. Touch the ON/OFF switch next to Power saver to turn Power saver mode on or off.

Use Extreme Power Saving Mode

In times when you don't need to use much of your phone, turn Extreme power saving mode on
to extend battery life longer. In this mode, standby time can last longer than usual, and you can
only use the most basic functions such as phone calls, text messaging, and email.
1. With two fingers, swipe down from the status bar to open the Quick Settings panel.
2. Touch the EXTREME POWER SAVING MODE tile to turn the mode on. Or to set when
to automatically switch this mode on, touch
Settings
below the tile.
240

Advertisement

Table of Contents
loading

This manual is also suitable for:

One (m8)

Table of Contents