Calibrate The Screen; Harman/Kardon Audio Setting; Sound Settings; General Sound Settings - Sound Profile And Vibrate - HTC Sprint User Manual

2. Touch Motion Launch gestures and enable this feature.

Calibrate the Screen

Recalibrate the screen if you feel that the screen orientation does not respond properly to the
way you hold the phone.
1. With two fingers, swipe down from the status bar, and then touch
gestures > G-Sensor calibration.
2. Place the phone on a flat surface, and then touch CALIBRATE.
3. After the recalibration process, touch OK.

Harman/Kardon Audio Setting

Use these settings to enable or disable harman/kardon's Clari-Fi and LiveStage audio
technologies.
1. With two fingers, swipe down from the status bar, and then touch
2. Touch harman/kardon audio.
3. Touch the ON/OFF switch beside the audio technologies that you want to enable or
disable.

Sound Settings

The Sound settings menu lets you control your phone's audio, from ringtones and alerts to
touch tones and notifications.

General Sound Settings - Sound Profile and Vibrate

Use the following settings for such features as silent mode, vibrate, and overall phone volume.
1. With two fingers, swipe down from the status bar, and then touch
profile.
2. Select Normal, Vibrate, or Silent.
3. To set your phone to always vibrate for calls in addition to any ringer settings, select the
Vibrate option below Volumes.
Note: If you selected Vibrate as your sound profile (step 2), your phone will vibrate for all
notifications and incoming calls.
4. Touch .
Settings
> Display &
.
> Sound > Sound
231