Securing The Premises; Checking System Status; General Information; System Can Be Armed - Honeywell ADEMCO LYNXR User Manual

Before arming your system, all protected doors, windows, and other protection zones must be closed or
bypassed (see the BYPASSING PROTECTION section). Pressing the
zones that are faulted, as well as any other abnormal system condition, making it easier for you to
secure any open zones.
READY LIGHT: The green READY indicator on the keypad will be lit if the system is ready to be
armed. If blinking, the system is not ready.
Press the key once to announce the general status of the system. Depending on the current state of the
system the following phrases may be heard:
NOTE: The phrases shown in brackets are variable, and are announced only if appropriate in the current state of
the system.
Press the key a second time
state of the system the following phrases may be heard:
VOLUME LEVEL: The volume level of system announcements can be increased or decreased. Refer
to the MESSAGE RECORDING/PLAYBACK section for the procedure.
The READY LED will be lit once all protection zones have been closed or bypassed. You may now arm
the system as usual.
†
to announce specific system status. Depending on the current
– 12 –
$%%&$
key will announce all