Table of Contents
Related Manuals for Honeywell ADEMCO LYNXRIEN-EA
Summary of Contents for Honeywell ADEMCO LYNXRIEN-EA
-
Page 1: Security System
ADEMCO LYNXRIEN-EA Security System User Guide ARMED READY ESCAPE RECORD VOLUME PLAY AWAY LIGHTS ON TEST BYPASS STAY DELETE LIGHTS OFF CODE CHIME SELECT STATUS NO DELAY FUNCTION K5964EA 10/07 Rev. A... - Page 2 Your Honeywell security system is designed for use with devices manufactured or approved by Honeywell for use with your security system. Your Honeywell security system is not designed for use with any device that may be attached to your security system's keypad or other communicating bus if Honeywell has not approved such device for use with your security system.
-
Page 3: Table Of Contents
LIMITATIONS OF THIS ALARM SYSTEM ..................54 ONE YEAR WARRANTY ........................55 Congratulations on your ownership of a Honeywell Security System. You have made a wise decision in choosing it, for it represents the latest in security protection technology today. Honeywell is the world's largest manufacturer of security systems, and millions of premises are protected by Honeywell products. - Page 4 – 4 –...
-
Page 5: System Overview
SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Features General Information This system offers you three forms of protection: burglary, fire, and emergency, depending on the configuration of your system. The system consists of a master keypad for controlling system operation, various wireless sensors that provide perimeter and interior burglary protection, and optional smoke or combustion detectors to provide early fire warning. - Page 6 SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Features • AUX key function: Designated key lets you activate a predefined series of keystrokes with a single press of the key plus user code, or manually send a pager message. It will also allow you to manually send a voice message to phone number that has been programmed by your installer.
-
Page 7: General Operation
SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW General Operation Zones Your system's sensing devices have been assigned to various "zones." For example, the sensing device on your entry/exit door may have been assigned to zone 01, sensing devices on windows in the master bedroom to zone 02, and so on. - Page 8 SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW General Operation until alarm bell timeout occurs. If your system is connected to a central monitoring station, an alarm message will be sent. To stop the alarm sounding, simply disarm the system. The zone(s) causing the alarm remain displayed indicating memory of alarm.
-
Page 9: Quick View Of System Functions
QUICK QUICK VIEW OF SYSTEM FUNCTIONS VIEW OF SYSTEM FUNCTIONS QUICK QUICK VIEW OF SYSTEM FUNCTIONS VIEW OF SYSTEM FUNCTIONS NOTE: = Boxes represent the entering of your 4-digit user code. SECURITY FUNCTIONS STATUS Checking system status: --------------- * + STAY To arm in STAY mode: ---------------- STAY (only if programmed and system armed in Stay mode) To restart exit delay: -------------------... - Page 10 QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS QUICK VIEW OF SYSTEM FUNCTIONS REMOTE PHONE CONTROL OPERATION + [1] To remotely disarm: --------------------- + [2] To remotely arm in AWAY mode: - + [3] To remotely arm in STAY mode: -- + [2] or [3] + [0] To remotely arm in AWAY or STAY mode with NO DELAY:...
-
Page 11: About The Master Keypad
SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW About the Master Keypad General IMPORTANT: If the keypad beeps rapidly upon entering the premises, an alarm has occurred during your absence and an intruder may still be on the premises. LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby safe location. -
Page 12: Master Keypad Definitions
SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW Master Keypad Definitions ARMED READY ESCAPE RECORD VOLUME PLAY AWAY LIGHTS ON TEST BYPASS STAY DELETE LIGHTS OFF CODE CHIME SELECT STATUS NO DELAY FUNCTION 01009-022-V1 IMPORTANT! When you use the keypad to enter codes and commands, press the keys within 2 seconds of one another. If 2 seconds elapse without a key depression, the entry is aborted and must be repeated from its beginning. - Page 13 SYSTEM OVERVIEW Master Keypad Definitions TEST 15. STAY / DELETE KEY: Tests the system and alarm KEY: Arms the perimeter sounder. burglary protection, guarding protected doors, windows and other perimeter protection points, and BYPASS KEY: Removes individual protection sounds an alarm if one is opened. Interior protection zones from being monitored by the system.
-
Page 14: About The Display And Indicators
SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW SYSTEM OVERVIEW About the Display and Indicators AWAY LOW BAT AC CHIME TEST INSTANT Display Definitions (for other displays, see Trouble Messages) STAY REC MESSAGE ALARM FAULT FIRE BYPASS ALARM: Appears when the system is armed and an intrusion has been detected (also appears during a fire alarm or audible emergency alarm). -
Page 15: Securing The Premises
SECURING THE PREMISES Checking System Status General Information Before arming your system, all protected doors, windows, and other protection zones must be closed or STATUS bypassed (see the BYPASSING PROTECTION section). Pressing the key will announce all zones that are faulted, as well as any other abnormal system condition, making it easier for you to secure any open zones. -
Page 16: Arming The System
SECURING THE PREMISES Arming the System Arming in Stay Mode Use this mode when you are staying home, but expect someone to use the entrance door later. Close all protected perimeter windows and doors before arming. The green READY indicator on the keypad should be lit if the system is ready to be armed. -
Page 17: Quick Arming
SECURING THE PREMISES Arming the System Arming the System With No Delay Use NO DELAY with STAY mode when you are staying home and do not expect anyone to use the entrance door. Use NO DELAY with AWAY mode when the premises will be vacant for extended periods of time such as vacations, etc. -
Page 18: Entry/Exit Delays
SECURING THE PREMISES Entry/Exit Delays Exit Delay Exit delay begins immediately after arming the system, and gives you time to leave through the designated exit door without setting off an alarm. A slow beeping will sound throughout the exit delay period, if programmed. -
Page 19: Disarming The System
SECURING THE PREMISES Disarming the System Use the key to disarm the system and to silence alarm and trouble sounds. See the SUMMARY OF AUDIBLE NOTIFICATION section for information, which will help you to distinguish between fire and burglary alarm sounds. IMPORTANT: If you return and the main burglary sounder is on, DO NOT enter the premises, but call the police from a nearby safe location. -
Page 20: Bypassing Protection Zones
SECURING THE PREMISES Bypassing Protection Zones Bypassing Individual Zones Use the BYPASS key when you want to arm your system with one or more zones intentionally unprotected. Bypassed zones are unprotected and will not cause an alarm when violated while your system is armed. -
Page 21: Panic Keys / Chime Mode
SECURING THE PREMISES Panic Keys / Chime Mode Panic Keys Your system may have been programmed to use special keys to manually activate panic functions. The functions that might be programmed are listed below. See your installer for the function(s) that may have been programmed for your system. -
Page 22: User Functions
USER FUNCTIONS Paging Feature Automatic Paging If the Paging feature has been programmed for your system, your pager will respond to certain conditions as they occur in your system by displaying a message that indicates the type of condition that has occurred. The message appears in a 7-digit format explained below. The system can also be programmed to send up to 16 additional digits that will appear in front of the 7-digit message. -
Page 23: Follow Me" Announcement Feature
USER FUNCTIONS “Follow Me” Announcement Feature “Follow Me” Reminder and System Announcements If the “Follow Me” Announcement feature has been programmed your system will automatically dial a telephone number and deliver a voice message. The two different types of “Follow Me” messages include system and reminder announcements. - Page 24 USER FUNCTIONS “Follow Me” Announcement Feature NOTES: (1) The “Follow Me” announcement will be terminated if any new report needs to be sent or if any key is pressed on the LYNXRIEN-EA keypad or a wireless (RF) keypad. The [✻] key on a wireless keypad is ignored by the system when the “Follow me”...
-
Page 25: Using Powerline Carrier Device Commands (Lights On/Lights Off Keys)
USER FUNCTIONS Using Powerline Carrier Device Commands (Lights On/Lights Off Keys) General Information Powerline Carrier devices (e.g. X10 brand devices) are programmable switches that can be used to perform many different functions. Your system may be set up so that certain lights or other devices can be turned on or off by using the device command from the keypad. -
Page 26: Message Recording/Playback/Volume Control
USER FUNCTIONS Message Recording/Playback/Volume Control The LYNXRIEN-EA Message Center allows you to record, play and delete messages. The maximum message duration is 85 seconds. NOTES: (1) The Record/playback functions can only be performed from the master keypad. It cannot be performed from any other wireless keypad. -
Page 27: Adjusting The Volume
USER FUNCTIONS Message Recording/Playback/Volume Control Adjusting the Volume The volume level of message playback, system announcements, and status beeps can be changed. You can also mute system announcements if desired. See NOTE below if using a wireless keypad. To adjust message playback/system announcement volume: FUNCTION + VOLUME + [3] or [6] †... -
Page 28: Aux Function
USER FUNCTIONS AUX Function General Information The AUX key may have been programmed to either perform a predefined function or to send a preset message to a pager/”Follow Me” system phone number (see Pager Feature section for pager operation or the Follow Me Announcement Feature section for “Follow Me”... -
Page 29: Clock/Calendar
USER FUNCTIONS Clock/Calendar Your system can display the current time (see your installer). The date is not displayed, but has an internal function. The system must be disarmed. + FUNCTION + [63] To set the time and date: Master user code or Installer Code The system will enter the Voice Prompt Calendar Setting mode. - Page 30 USER FUNCTIONS Clock/Calendar The system will announce, “Enter two-digit day press ADD to accept, ESCAPE to quit”. 01 (The current day of the month will display.) Enter the 2-digit day of the month (i.e., 01-31). Press [ADD] to accept the entry and continue to the year setting. Press [ESCAPE] to back up to Month selection.
-
Page 31: Scheduling User Interface
USER FUNCTIONS Scheduling User Interface [64] FUNCTION To access the Scheduling User Interface enter: Master user code or Installer Code The following entries will be sequentially prompted to the user. Note that all inputs are checked for validity upon entry and all invalid entries are rejected. Hitting a [*] will allow the entries to be accepted and advance to the next field. -
Page 32: Event Identifier
USER FUNCTIONS Scheduling User Interface NOTE: The keypad beeps twice for invalid data entries (e.g.: an hour greater than 12), and the entry will not be accepted. The keypad beeps once for valid entries and four times when a schedule event is programmed successfully. - Page 33 USER FUNCTIONS Scheduling User Interface Begin Time (minute) b : xx [xx] = begin minute 0 to 59 [*] = continue [#] = return to previous prompt Begin Day • If the value programmed in the Event Identifier is “3”, xx : bd [xx] = begin day 01 to 17 “4”, or “5”, and the current entry is completed, the...
- Page 34 USER FUNCTIONS Scheduling User Interface Event Identifier Entries Entry Event Comment Empty No event scheduled (or schedule is temporarily disabled) X10 Device Turn an X10 device, either on or off at begin/end times. (will have a start and end time to program) (time driven) NOTE: SH10A siren cannot be used.
-
Page 35: Day Of Week Entries
USER FUNCTIONS Scheduling User Interface Day of Week Entries Entry Invalid day entry Do event on next time match on the next Monday (will remove itself after executing) Do event on next time match on the next Tuesday (will remove itself after executing) Do event on next time match on the next Wednesday (will remove itself after executing) Do event on next time match on the next Thursday (will remove itself after executing) Do event on next time match on the next Friday (will remove itself after executing) -
Page 36: Remote Phone Control Feature
USER FUNCTIONS Remote Phone Control Feature The LYNXRIEN-EA is equipped with a remote interactive phone capability that permits access to the security system from any off-site touch-tone telephone using all user codes. If this feature has been programmed, the system will provide the appropriate voice messages and any system beeping sounds indicating the status of the security system over the phone line. - Page 37 USER FUNCTIONS Remote Phone Control Feature (within eight seconds) Enter: Your user code Upon entering remote phone control mode the Lynx will announce “System, enter code”. Remote Phone Control Commands + [1] To remotely disarm system: Your user code + [2] To remotely arm in AWAY mode: Your user code + [3]...
-
Page 38: Speaker Phone Feature
USER FUNCTIONS Speaker Phone Feature If this feature has been programmed the LYNXRIEN-EA is capable of operating as a speaker phone. During speaker phone operation the system will provide the following functions: • All function/event processing will continue to operate, but there will be no announcements. •... - Page 39 USER FUNCTIONS Speaker Phone Feature LYNXRIEN-EA Speaker Phone Functions [#] + AUX and dial the desired phone number. To place a call using the Speaker Phone: [#] + AUX NOTE To answer a call using the Speaker Phone: you are using pulse (rotary) To flash (switch between two calls using call waiting): dialing, make...
-
Page 40: Fire Alarm System
FIRE ALARM SYSTEM FIRE ALARM SYSTEM FIRE ALARM SYSTEM FIRE ALARM SYSTEM (If Installed) (If Installed) (If Installed) (If Installed) General Information General Your fire alarm system (if installed) is active 24 hours a day, providing continuous protection. In the event of an emergency, the installed smoke and heat detectors will automatically activate your security system, triggering a loud, intermittent sound from the keypad. -
Page 41: System Functions
SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS Security Codes General Information For additional security you (the Master User Code) can assign secondary user codes to individual users enabling them to perform specific system functions. These secondary users are identified by "user numbers"... -
Page 42: Testing The System
SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS Testing the System (to be conducted weekly) Entering Test Mode TEST key puts your system into the Test mode, which allows each protection point to be checked for proper operation. The keypad sounds a single beep every 45 seconds as a reminder that the system is in the Test mode. -
Page 43: Trouble Messages
SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS Trouble Messages Typical Trouble Condition Displays To silence the beeping sound for fault conditions, press any key. FAULT Indicates that a problem exists with the zone(s) displayed, accompanied by rapid beeping. First, determine if the zone(s) displayed are intact and make them so if they are not. If the zone uses a wireless detector, check that changes in the room (moving furniture, televisions, etc.) are not blocking wireless signals from the detector. -
Page 44: Maintaining Your System
SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS SYSTEM FUNCTIONS Maintaining your system The components of your security system are designed to be as maintenance-free as possible. To make sure that your system is in working condition, do the following: 1. Test your system weekly. 2. -
Page 45: Summary Of Audible Notification
Summary o o o o f Audible Notification Summary f Audible Notification Summary Summary f Audible Notification f Audible Notification *UPPER CASE indicates announcements after pressing STATUS once. Lower case indicates announcements after pressing STATUS twice. SOUND CAUSE DISPLAY ANNOUNCEMENT* INTERRUPTED FIRE ALARM FIRE ALARM is displayed;... - Page 46 Summary Summary o o o o f Audible Notification f Audible Notification Summary Summary f Audible Notification f Audible Notification Additional Announcements: Pressing STATUS key once will announce the following primary messages, depending on the system’s status at the time: Disarmed–Ready to Arm [check system] Disarmed [not ready to arm] Armed [away] [stay] [instant] [check system] [exit now]...
-
Page 47: Owner's Insurance Premium Credit Request
OWNER'S INSURANCE PREMIUM CREDIT REQUEST This form should be completed and forwarded to your homeowner's insurance carrier for possible premium credit. A. GENERAL INFORMATION: Insured's Name and Address: Insurance Company: Policy No.: ADEMCO LYNXRIEN-AP ____________________________________________ Other Type of Alarm: Burglary Fire Both Installed by:... - Page 48 OWNER'S INSURANCE PREMIUM CREDIT REQUEST (cont.) E. SMOKE DETECTOR LOCATIONS Furnace Room Kitchen Bedrooms Attic Basement Living Room Dining Room Hall F. BURGLARY DETECTING DEVICE LOCATIONS: Front Door Basement Door Rear Door All Exterior Doors 1st Floor Windows All Windows Interior Locations All Accessible Openings, Including Skylights, Air Conditioners and Vents G.
-
Page 49: Servicing Information
SERVICING INFORMATION Your local Honeywell dealer is the person best qualified to service your alarm system. Arranging some kind of regular service program with him is advisable. Your local Honeywell dealer is: Name: Address: Phone: – 49 –... -
Page 50: Index
INDEX EA ..............18 AC..............14 End day ............33 End time............33 Adjusting the volume........27 Alarm .............. 14 Entry delay..........7, 18 Alarm monitoring company......21 Event entries........... 34 Alarms............... 7 Event identifier ..........32 Armed indicator ..........12 Exit alarms............ - Page 51 Schedule number ..........32 Pager ............10, 28 Scheduling............31 Pager code ............22 Security codes.......... 6, 7, 41 Paging feature......... 5, 22, 23, 28 Security functions ..........9 Panic key ............. 5, 21 Servicing information ........47 Personal emergency/aux. Alarm ....21 Silencing a fire alarm .......
- Page 52 Notes — — — — — — — — – 52 –...
- Page 53 Notes — — — — — — — — – 53 –...
-
Page 54: Limitations Of This Alarm System
WARNING! THE LIMITATIONS OF THIS ALARM SYSTEM While this system is an advanced design security system, it does not offer guaranteed protection against burglary or fire or other emergency. Any alarm system, whether commercial or residential, is subject to compromise or failure to warn for a variety of reasons. -
Page 55: One Year Warranty
ONE YEAR LIMITED WARRANTY Honeywell International Inc., acting through its Security & Custom Electronics business ("Seller"), 165 Eileen Way, Syosset, New York 11791, warrants its security equipment (the "product") to be free from defects in materials and workmanship for one year from date of original purchase, under normal use and service. - Page 56 Flat A, 16/F, CDW Building 388 Castle Peak Road, Tsuen Wan, Hong Kong Copyright © Honeywell International Inc. www.asia.security.honeywell.com/ ‡K5964EApŠ K5964EA 10/07 Rev. A...