Motor Attachment - Honda Outboard Motor BF15A Owner's Manual

3. Motor Attachment
Attach the stern bracket to the tran-
som and tighten the clamp screws.
CAUTION:
l
While operating the boat, check
the tightness of the clamp screws
occasionally.
l
Tie a rope through the hole in the
stern bracket and secure the other
end of the rope to the boat. This
will prevent accidental loss of the
motor.
NOTE: To prevent the outboard mo-
tor from falling accidentally, you may
further secure the stern bracket to
the transom board with commercially
available bolts, nuts and washers.
After attaching the stern bracket to
the transom board, be sure to apply
sealant (THREEBOND 1216 or
SAFETY
ROPE
STERN
BRACKET
WASHER
\
/
eouivalent) to the bolt holes.
BOL
This modification should be made by
your authorized Honda dealer.
WAS-HER TRANSOM BOARD
8