Telemetry / Hr Kit - Life Fitness 9500 Series Service Manual

Life Fitness Model 9500 Series HR and Telemetry Equipped Treadmills
How To...REMOVE AND REPLACE THE TELEMETRY / HR KIT
Tools Required: Phillips screwdriver
Step 1
Turn the power OFF at the ON/OFF switch and by unplugging the machine at the electrical outlet.
Step 2
Use a Phillips screwdriver to loosen and remove the two SCREWS securing the TELEMETRY/HEART RATE
SENSOR COVER to the bottom of the CONSOLE PAN.
Step 3
Gently pull on the WIRE HARNESS protruding from the CONSOLE PAN to provide some slack in the line. Remove
the TELEMETRY/HEART RATE RECEIVER from within the protective foam and unplug the RECEIVER from the
receptacle on the WIRE HARNESS.
Step 4
Install the new TELEMETRY/HEART RATE RECEIVER by reversing Steps 1 through 3 to return all parts to their
proper position.
NOTE: BE CAREFUL NOT TO PINCH ANY WIRES BETWEEN THE CONSOLE PAN AND
THE TELEMETRY/HEART RATE SENSOR COVER DURING INSTALLATION.
3