Radio Shack TAD-724 Owner's Manual page 3

43-724A.fm Page 3 Tuesday, May 16, 2000 4:51 PM
Programmable Remote Operation
Security Code — lets you set your
own 3-digit security code for remote
operation.
Room Monitor — lets you listen from
a remote location to the room where
the TAD is installed.
Adjustable Ring Number — lets you
set the TAD to answer after two, four,
or seven rings.
Toll-Saver — lets you avoid unneces-
sary toll charges when you call long-
distance to check your messages.
Multiple Outgoing Message Capaci-
ty — lets you set the TAD to play two
outgoing messages and record the
callers message.
Selectable Incoming
Length — lets you set the maximum
length of a caller's message to 1 or 5
minutes.
Memory Full Warning — beeps twice
and announces "Memory is full."
Memory Backup — protects stored
messages in case of a power failure.
Message Indicator — flashes to let
you know you have new messages.
Message Counter
shows the number of messages the
TAD has recorded.
We recommend you record your sys-
tem's serial number here. The number
is on the bottom of the TAD-724.
Serial Number __________________
Your system is ETL listed to UL stan-
dards and meets all applicable FCC
standards.
WARNING:
shock hazard, do not expose this product to
rain or moisture.
Message
Indicator —
To reduce the risk of fire or
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION
: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVIC-
ING TO QUALIFIED PERSONNEL.
This symbol is intended to alert
you to the presence of uninsu-
lated dangerous voltage within
the product's
might be of sufficient magnitude
to constitute a risk of electric
shock. Do not open the product's
case.
This symbol is intended to inform
you that important operating and
!
maintenance instructions
included in the literature accom-
panying this product.
!
enclosure that
are
3