Fuel Sediment Cup Cleaning - Honda EN5000 Owner's Manual

FUEL SEDIMENT CUP CLEANING
The sediment cup prevents dirt or water which may be in the fuel tank
from entering the carburetor. If the engine has not been run for a long
time, the sediment cup should be cleaned.
1. Turn the fuel valve lever to the OFF position. Remove the sediment
cup and O-ring.
2.Clean the sediment cup and O-ring in nonflammable or high flash
point solvent.
3. Reinstall the O-ring and sediment cup.
4. Turn the fuel valve lever
ON
and check for leaks.
34