FUEL SEDIMENT CUP CLEANING
The sediment cup prevents dirt or water which may be in the fuel tank
from entering the carburetor. If the enging has not been run for a long
time, the sediment cup should be cleaned.
1. Turn the fuel valve lever to the OFF position. Remove the sediment
cup, O-ring, and filter.
2. Clean the sediment cup, O-ring, and filter in nonflammable or high
flash point solvent.
3. Reinstall the filter, O-ring, and sediment сир.
4. Turn the fuel valve lever ON and check for leaks.
FUEL VALVE
LEVER
O-RING
FUEL FILTER
СУ.
_ о-вме
SEDIMENT CUP
32