Honda EN5000 Owner's Manual page 19

AC OPERATION
1. Start the engine (see page23).
2. Plug in the appliance.
Be sure that all appliances are in good working order before
connecting them to the generator. If an appliance begins to operate
abnormally, becomes sluggish, or stops suddenly, turn off the ignition
switch immediately. Then disconnect the appliance and examine it for
signs of malfunction.
Most motorized appliances require more than their rated wattage for
startup.
Do not exceed the current limit specified for any one receptacle. If an
overloaded circuit causes the AC circuit protector to switch OFF,
reduce the electrical load on the circuit, wait a few minutes and
then
reset the AC circuit protector.
AC CIRCUIT PROTECTOR
240 V RECEPTACLES
120 V RECEPTACL
c
ON
OFF
.ES
17