Table of Contents
Advertisement
4.
Follow the onscreen instructions for the selected driver to install.
5.
Restart the system.
Using your ZOTAC ZBOX nano
Please follow the instructions below to connect to a wireless network:
1.
Double-click the crossed wireless network icon (pic) in the
2.
Select the wireless network you want to connect to from the
list and click Connect.
3.
After connection was established, you will see "Connected".
Note 1: For security concerns, Do NOT connect to an unsecured network,
otherwise, the transmitted information without encryption might be visible to
others.
Note 2: Enter the network security key if necessary.
1.
Right-click the network icon in the
Network Connections".
2.
Right-click "Local Area Connection" and
select "Properties".
3.
Highlight "Internet Protocol (TCP/IP)"
and click "Properties".
4.
Select "Use the following IP address".
5.
Enter your IP address, subnet mask and
Default gateway.
6.
Enter the preferred DNS server address if necessary.
ZOTAC ZBOX nano
23
- Quick Links:
- Setting up the Zotac Zbox Nano
Hide quick links:
Advertisement
Table of Contents
