Front View - Zotac ZBOXNANO-ID61-PLUS-U User Manual

ZOTAC ZBOX nano
Getting to know your ZOTAC ZBOX nano

Front view

Refer to the diagram below to identify the components on this side of the system
The power switch turns the mini-PC ON and OFF.
The HDD status indicator shows when the hard disk is transfering data.
The IR receiver is used to receive the signal from the IR remote control.
The built-in memory card reader reads and writes MMC/SD/SDHC/MS/MS Pro/xD/
SDXC cards used in devices such as digital cameras, MP3 players, mobile phones
and PDAs.
The headphone/SPDIF jack (3.5mm) is used to connect the system's audio out
the headphone/SPDIF adapter included in the package. The optical SPDIF output
enables connecting the ZBOX nano to digital audio receivers and speakers for
crystal clear digital audio and surround sound from compatible soundtracks.
The microphone jack is designed to connect a microphone for video conferencing,
voice narrations or simple audio recordings.
Note 1: The power adapter may become warm to hot when in use. Do not cover the adapter and keep it
away from your body.
Note 2: Due to the special design for easy upgrade, some connectors are placed upside down.
6
1 3
2 4
5
6
7