Using A Dynamic Ip (Pppoe Connection) - Zotac ZBOXNANO-ID61-PLUS-U User Manual

ZOTAC ZBOX nano
1. Repeat Step 1-3 in the previous section.
2. Select "Obtain an IP address automatically" and click "OK".
4. Click "Next".
5. Select "Connect to the Internet" and click "Next".
6. Select "Set up my
connection manually".
7. Select your connection
type and click "Next".
8. Enter your ISP Name and
click "Next".
9. Enter your User name and
Password. Click "Next".
11. Enter your user name and password. Click
"Connect" to connect to the internet.
Note: Contact your internet Service Provider (ISP) if you have problems connecting to the network.
Follow the steps below to enable audio output via HDMI when connecting the
1. Access the Sound settings via the system
Control Panel.
2. Under Playback devices, click the display
device item "Philips 234EL" (the device
name depends on your display brand and
model).
3. Click the "Set Default" in the lower right
hand corner.
4. Click "OK" to exit the setup.
24
291-MA237-00