Table of Contents
Advertisement
Each driver must be installed individually to ensure proper operation of the
ZOTAC ZBOX.
3.
Select the driver you want to install. The driver installer should launch.
4.
Follow the onscreen instructions to install the drivers.
5.
Restart the system.
Using your ZOTAC ZBOX
1.
Double-click the crossed wireless network icon (pic) on
2.
Select the wireless network you want to connect to
from the list and click Connect.
3.
After connection was established, you will see
Connected.
Connect the supplied wireless antenna to your ZOTAC
ZBOX to enhance wireless signal reception.
For security concerns, Do NOT connect to an
unsecured network, otherwise, the transmitted
information without encryption might be visible to
others.
Enter the network security key if necessary.
1.
Right-click the network icon on the
Network Connections.
select Properties.
3.
Highlight Internet protocol (TCP/IP) and
click Properties.
4.
Select Use the following IP address.
5.
Enter your IP address, subnet mask and
Default gateway.
6.
If needed, enter the preferred DNS server address.
ZOTAC ZBOX
17
Advertisement
Table of Contents
