Integrated Peripherals - ECS PF21 Extreme User Manual

3.3-4 Integrated Peripherals

These options display items that define the operation of peripheral
components on the system's input/output ports.
Phoenix-AwardBIOS CMOS Setup Utility

Integrated Peripherals

OnChip IDE Device [Press Enter]
Onboard Device [Press Enter]
SuperIO Device [Press Enter]
: Move Enter: Select +/-/PU/PD:Value
F5:Previous Values F6:Fail-Safe Defaults
Item Help
Menu Level
F10:Save ESC:Exit F1: General Help
F7:Optimized Defaults
OnChip IDE Device (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
Phoenix-AwardBIOS CMOS Setup Utility
OnChip IDE Device
IDE HDD Block Mode [Enabled]
ATA 66/100 Cable Msg [Enabled]
IDE DMA transfer access [Enabled]
On-Chip Primary PCI IDE [Enabled]
IDE Primary Master PIO [Auto]
IDE Primary Slave PIO [Auto]
IDE Primary Master UDMA [Auto]
IDE Primary Slave UDMA [Auto]
On-Chip Secondary PCI IDE [Enabled]
IDE Secondary Master PIO [Auto]
IDE Secondary Slave PIO [Auto]
IDE Secondary Master UDMA [Auto]
IDE Secondary Slave UDMA [Auto]
*** On-Chip Serial ATA Setting ***
On-Chip Serial ATA [Disabled]
PATA IDE Mode [Primary]
SATA Port P1, P3 is Secondary
: Move Enter: Select +/-/PU/PD:Value
F5:Previous Values F6:Fail-Safe Defaults
IDE HDD Block Mode [Enabled]
Enable this field if your IDE hard drive supports block mode. Block mode enables
BIOS to automatically detect the optimal number of block read and writes per sector
that the drive can support and improves the speed of access to IDE devices.
ATA 66/100 Cable Msg [Enabled]
This item enables or disables the display of the ATA 66/100 Cable MSG.
Item Help
Menu Level
If your IDE hard drive
supports block mode select
Enabled for automatic
detection of the optimal
number of block read/writes
per sector the drive can
support
F10:Save ESC:Exit F1: General Help
F7:Optimized Defaults
3-9