Load Performance Defaults; Load Optimized Defaults; 10 Load Optimized Defaults; Set Supervisor/User Password - ECS PF21 Extreme User Manual

3.3-9 Load Performance Defaults

If you select this item and press Enter a dialog box will appear. If you select
[OK], and then Enter, the Setup Utility loads a set of performance default
values. These default settings are quite demanding and your system might
not function properly if you are using slower CPU, memory, or other low-
performance components.
Warning: To load Performance settings may make your system become
unstable or unbootable.

3.3-10 Load Optimized Defaults

This option opens a dialog box that lets you install optimized defaults for all
appropriate items in the Setup Utility. Press <Y> and then <Enter> to
install the defaults. Press <N> and then <Enter> to not install the de-
faults. The optimized defaults place demands on the system that may be
greater than the performance level of the components, such as the CPU
and the memory. When your hardware doesn't support the "Optimized
Defaults", fatal system errors or instability may occur. If you only want to
install setup defaults for a specific option, select and display that option,
and then press <F7>.
Users please remain the factory BIOS default setting of "Load optimized
Defaults" when install Operation System onto your system.

3.3-11 Set Supervisor/User Password

When this function is selected, the following message appears at the center
of the screen to assist you in creating a password.
ENTER PASSWORD
Type the password, up to eight characters, and press <Enter>. The password
typed now will clear any previously entered password from CMOS memory.
You will be asked to confirm the password. Type the password again and
press <Enter>. You may also press <Esc> to abort the selection.
To disable password, just press <Enter> when you are prompted to enter
password. A message will confirm the password being disabled. Once the
password is disabled, the system will boot and you can enter BIOS Setup
freely.
PASSWORD DISABLED
If you have selected "System" in "Security Option" of "BIOS Features
Setup" menu, you will be prompted for the password every time the system
reboots or any time you try to enter BIOS Setup.
If you have selected "Setup" at "Security Option" from "BIOS Features
Setup" menu, you will be prompted for the password only when you enter
BIOS Setup.
3-19